分体式操作台

分体式操作台
产品编号: 62522431916 产品名称: 分体式操作台
产品详细介绍:

   “巴合曼”分体式操作台工艺特点介绍

1、安装嵌条 已打好装配孔的嵌条垂直焊接在箱门的两旁,使用M4自攻螺丝,方便安装 
2、密封圈 聚氨脂发泡封胶条密封性能可靠 
3、门使用销钉式铰链,可开启110° 
4、槽型箱边 防止灰尘和水进入箱内,并能够完好地与密封圈配合,形成对箱内的防护 
5、箱体支架可根据客户要求定制
6、颜色RAL7032、RAL7035(电脑灰、电脑白) 
7、材料 冷轧钢板 门 1.5-2.0mm 箱体1.2-1.5mm 安装板2.5mm(镀锌) 
8、防护等级IP56 
9、表面处理:磷化、喷粉
1.Install panel strip
Weld the panel strip with assemble holes perpendiculy to the sides of cabinet door, use M4 self tapping screw for easy installation.
2. Seal ring
Polyurethane foaming seal strip seals reliably.
3.Door uses pin pallet hinge, can open 110 °.
4.Slot cabinet side
Prevent dust and water from entering the cabinet, and can seal completely with sealing strip.
5.Cabinet support be made as per the customer’s requirement.
6.Color RAL7032,RAL7035  (Computer grey, computer white)
7.Material
Cold rolled steel plate
Door 1.5-2.0 mm
Cabinet 1.2-1.5 mm(galvanized)
Installation plate 2.5 mm(galvanized)
8.Protection grade IP569
9. Surface treatment: phosphating, plastic spraying

  如需了解本公司更多产品,请点击本公司网站首页www.baheman.com!

 
返回 打印此页 关闭本页